coredesktop/install.sh

#!/bin/bash -i
#
# Purpose : CoreDesktop installer

# Print the logo
print_logo() {
  cat << "EOF"

    ██
  █   ██
    ██    ██████    █████         ██    █████     █████     ████    ██        █████         ██
         ██    ██  ██   ███  ███████   ██   ██   ██   ██       ██  ████████  ██    ██  ███████
         █████     ██████   ██    ██   ██████    ██      ████████   ██   █   ███████   ██   ██
         ██        ██████    ███████   ██████    ██       ██████    ██████   ██████    ███████

EOF
}

# Clear screen and show logo
clear
print_logo
cd

# Log the install to ~/.local/state/coredesktop/logs (update deletes old ones).
# It's usually piped into bash, so it can't run itself again under script(1)
# the way update does; send its output through tee instead.
if mkdir -p -m 700 "$HOME/.local/state/coredesktop/logs"; then
  INSTALL_LOG="$HOME/.local/state/coredesktop/logs/install-$(date +%Y-%m-%d-%H%M%S).log"
  exec > >(tee -a "$INSTALL_LOG") 2>&1
  TEE_PID=$!
fi

# Exit on any error
set -e

# What can't be fixed from here, checked before anything changes. The rest of
# the checks need the repo (system/preflight.sh, below).
if [ "$(id -u)" -eq 0 ]; then
  echo "Run this as your own user, not as root. It asks for your password when it needs sudo."
  exit 1
fi
if [ ! -f /etc/arch-release ] || ! command -v pacman &> /dev/null; then
  echo "CoreDesktop needs Arch Linux. See \"Installing Arch\" in the README."
  exit 1
fi
if [ "$(uname -m)" != x86_64 ]; then
  echo "CoreDesktop needs a 64-bit PC (x86_64); this is $(uname -m)."
  exit 1
fi
if ! curl -fsS --max-time 15 -o /dev/null https://archlinux.org; then
  echo "Couldn't reach archlinux.org. Connect to the internet and run this again."
  exit 1
fi

# Ask for the password once, then keep sudo's cached credentials fresh until
# the install exits, so long builds don't stop for a password again. Unlike a
# passwordless sudoers entry, nothing is left behind if the install is killed.
if ! sudo -v; then
  echo "Couldn't use sudo. If your password was right, your user needs sudo rights (in"
  echo "archinstall, make the user a superuser): https://wiki.archlinux.org/title/Sudo"
  exit 1
fi
while kill -0 $$ 2> /dev/null; do sudo -n -v; sleep 60; done > /dev/null 2>&1 &
SUDO_KEEPALIVE_PID=$!
on_exit() {
  local status=$?
  kill "$SUDO_KEEPALIVE_PID" 2> /dev/null
  if (( status != 0 )) && [ -n "$INSTALL_LOG" ]; then
    echo "The install stopped with an error. The full output is in $INSTALL_LOG"
    # Offer to send the log to us, once tee has written all of it (a second at
    # most). report asks on the terminal, so this needs one.
    local report="$HOME/.local/share/coredesktop/report" i
    if [ -f "$report" ] && { : < /dev/tty; } 2> /dev/null; then
      exec > /dev/tty 2>&1
      for (( i = 0; i < 10; i++ )); do
        kill -0 "$TEE_PID" 2> /dev/null || break
        sleep 0.1
      done
      bash "$report" --offer "$INSTALL_LOG" install.sh
    fi
  fi
}
trap on_exit EXIT

# Ensure git is available before attempting to clone anything
if ! command -v git &> /dev/null; then
  echo "Installing git..."
  sudo pacman -S git --noconfirm
else
  echo "git is installed."
fi

# Update or clone the CoreDesktop repo
echo "Getting the latest version of CoreDesktop..."
if [ -d "$HOME/.local/share/coredesktop/.git" ]; then
  git -C ~/.local/share/coredesktop pull --ff-only
else
  git clone https://gitea.federated.computer/Federated_Computer/coredesktop.git ~/.local/share/coredesktop
fi

cd ~/.local/share/coredesktop

# Source utility functions (provides install_packages and other helpers)
source utils.sh

# Install the refresh, update, sibling, version, configure, audit and report scripts to the user's bin
mkdir -p ~/.local/bin
install_script ~/.local/share/coredesktop/refresh ~/.local/bin/refresh
install_script ~/.local/share/coredesktop/update ~/.local/bin/update
install_script ~/.local/share/coredesktop/sibling ~/.local/bin/sibling
install_script ~/.local/share/coredesktop/version ~/.local/bin/version
install_script ~/.local/share/coredesktop/configure ~/.local/bin/configure
install_script ~/.local/share/coredesktop/audit ~/.local/bin/audit
install_script ~/.local/share/coredesktop/report ~/.local/bin/report

# Source the package list (defines SYSTEM_UTILS, DEV_TOOLS, DESKTOP, etc. arrays)
if [ ! -f "packages.conf" ]; then
  echo "Error: packages.conf not found!"
  exit 1
fi
source packages.conf
source remove-packages.conf

# Disk space, btrfs, display manager and sound server: stops, asks, or offers
# to fix what it finds
bash ~/.local/share/coredesktop/system/preflight.sh

echo "Starting full system setup..."

# Federated Computer's own packages (Federated Calendar, ...)
echo "Adding the Federated Computer package repo..."
ensure_federated_repo

# Bring the system fully up to date before installing anything new
echo "Updating system..."
sudo pacman -Sy --needed --noconfirm archlinux-keyring
sudo pacman -Su --noconfirm

cd ~/

# Install yay AUR helper if not present — required for AUR packages installed later
if ! command -v yay &> /dev/null; then
  echo "Installing yay AUR helper..."
  sudo pacman -S --needed git base-devel --noconfirm
  if [[ -d "yay" ]]; then
    echo "yay directory already exists, removing it..."
    rm -rf yay
  fi
  echo "Cloning yay repository..."
  git clone https://aur.archlinux.org/yay.git
  cd yay
  echo "Building yay..."
  makepkg -si --noconfirm
  cd ..
  rm -rf yay
else
  echo "yay is already installed."
fi

# Remove replaced packages first, so their replacements don't conflict with them
echo "Removing unwanted packages..."
remove_packages "${REMOVE_PACMAN[@]}"
remove_flatpaks "${REMOVE_FLATPAKS[@]}"

# Install packages grouped by category as defined in packages.conf
echo "Installing system utilities..."
install_packages "${SYSTEM_UTILS[@]}"

echo "Installing development tools..."
install_packages "${DEV_TOOLS[@]}"

echo "Installing system maintenance tools..."
install_packages "${MAINTENANCE[@]}"

echo "Installing desktop environment..."
install_packages "${DESKTOP[@]}"

echo "Installing media packages..."
install_packages "${MEDIA[@]}"

echo "Installing fonts..."
install_packages "${FONTS[@]}"

echo "Installing pipx applications..."
install_pipx_apps "${PIPX[@]}"

# Enable the services in SERVICES, and enable and start those in START_SERVICES,
# then register the SSH Avahi service so the machine is discoverable over mDNS
echo "Configuring services..."
enable_services "${SERVICES[@]}"
enable_services --now "${START_SERVICES[@]}"
sudo cp /usr/share/doc/avahi/ssh.service /etc/avahi/services/

cd ~/.local/share/coredesktop

# Install GNOME shell extensions via the dedicated script
echo "Installing GNOME extensions..."
. gnome/gnome-extensions.sh

# Install Flatpak apps — some programs run better sandboxed as Flatpaks
echo "Installing flatpaks..."
. install-flatpaks.sh

# Install TPM (Tmux Plugin Manager) and configured plugins
echo "Installing tmux plug-in manager..."
. install-tpm.sh

# Install Kickstart Neovim config as the default Neovim configuration
echo "Installing Kickstart Neovim..."
. install-kickstart-nvim.sh

# Install Claude Code and configure desktop notification hooks
echo "Installing Claude Code..."
bash claude.sh

# Run AI agents (opencode, hermes) in a sandbox, and turn on Claude Code's own
echo "Setting up sandboxed AI agents..."
bash ~/.local/share/coredesktop/sandbox/setup.sh

# Configure Bitwarden SSH agent
echo "Configuring Bitwarden SSH agent..."
. bitwarden.sh

# Add the current user to the docker group and start the Docker daemon
# Group membership takes effect at next login (newgrp would start an interactive shell)
sudo usermod -aG docker $USER
sudo systemctl enable docker.service
sudo systemctl start docker.service

# Enable and start Tailscale daemon
if ! systemctl is-enabled tailscaled &> /dev/null; then
  sudo systemctl enable tailscaled
fi
if ! systemctl is-active tailscaled &> /dev/null; then
  sudo systemctl start tailscaled
fi

# SSH keepalives, login lockout, shutdown timeout, OOM protection, boot, SSH PATH
echo "Applying system defaults..."
bash ~/.local/share/coredesktop/system/defaults.sh

# Leave Wi-Fi to NetworkManager alone if archinstall turned on iwd as well
echo "Checking Wi-Fi..."
bash ~/.local/share/coredesktop/system/wifi.sh

# SSH logins with keys only, not passwords
echo "Configuring the SSH server..."
bash ~/.local/share/coredesktop/system/sshd.sh

# Block incoming connections except SSH, mDNS, LocalSend and Tailscale
echo "Configuring the firewall..."
bash ~/.local/share/coredesktop/system/firewall.sh

# Keep pacman on mirrors that are up to date with Arch
echo "Configuring package mirrors..."
bash ~/.local/share/coredesktop/system/mirrors.sh

# Snapshot / before each update (btrfs only)
echo "Configuring Snapper..."
bash ~/.local/share/coredesktop/system/snapper.sh

echo "Installing GPU drivers..."
bash ~/.local/share/coredesktop/system/vulkan.sh
bash ~/.local/share/coredesktop/system/nvidia.sh

# Prompt, zoxide, fzf key bindings, aliases and functions
echo "Configuring the shell..."
bash ~/.local/share/coredesktop/shell/setup.sh

# Keep WinBoat's Windows container from starting at boot (if it's set up)
bash ~/.local/share/coredesktop/system/winboat.sh

# Notify in GNOME when a new version of CoreDesktop is available
echo "Configuring update notifications..."
bash ~/.local/share/coredesktop/system/update-notify.sh

# Pause a Core's email when the mail server stops taking its password
echo "Configuring email password checks..."
bash ~/.local/share/coredesktop/system/email-watch.sh

# Apply GNOME dconf settings only if the settings file has changed since last run
bash ~/.local/share/coredesktop/gnome/apply-gnome-settings.sh

# Fix mDNS configuration if systemd-resolved is managing DNS on this system
if systemctl is-enabled systemd-resolved.service &> /dev/null; then
  echo "systemd-resolved is enabled, applying mDNS fix..."
  bash ~/.local/share/coredesktop/fixmdns.sh
fi

# Run one-time migrations not yet recorded on this machine. On a fresh install
# they repeat setup done above, which is safe because each one is idempotent.
echo "Running migrations..."
run_migrations

# Say the install worked, whether to reboot, and offer configure
bash ~/.local/share/coredesktop/system/finish-install.sh